RSLogix 5000 / Studio 5000 V24 through V30 Safety Configuration Signature When Using Generic EtherNet/IP Safety Module Profile Posted on June 2, 2017 by Brandy McNeil Error with RSLogix 5000 Studio 5000 Safety Configuration Signature Product Safety Group 1201 South Second Street Milwaukee, WI USA 53204 productsafety@ra.rockwell.com PRODUCT SAFETY ADVISORY Notice of Potential Unsafe Condition Rockwell Automation issues a Product Safety Advisory when it identifies a product(s) anomaly that may potentially cause harm to personnel, capital equipment loss or environmental damage. Immediate action is required as identified below. RSLogix 5000 / Studio 5000 V24 through V30 Safety Configuration Signature When Using Generic EtherNet/IP Safety Module Profile Reference: 2017-06-002 Date: June 2017 This Product Safety Advisory informs you of a potential anomaly that exists when using the Generic EtherNet/IP™ Safety Module profile for RSLogix 5000® and Studio 5000® V24 through V30. This anomaly affects 1756 GuardLogix® projects created using a version of RSLogix 5000 prior to V24 that have been upgraded to a version of RSLogix 5000 or Studio 5000 V24 through V30. The Generic EtherNet/IP Safety Module profile does not properly handle an online change made to the Safety Configuration Signature ID on the Safety page of the profile, due to an anomaly in the Add-on Profile (AOP) core software. PRODUCT SAFETY ADVISORY Page 2 of 5 – Product Identification – The affected product is the Generic EtherNet/IP Safety Module Profile and included as part of the RSLogix 5000 and Studio 5000 V24 through V30 Architect and Logix Designer programming environments. For the anomaly to occur, all of the following conditions must be met: 1756 GuardLogix project created in RSLogix 5000 prior to V24, Using the Generic EtherNet/IP Safety Module profile, and Upgraded the 1756 GuardLogix project to RSLogix 5000 or Studio 5000 V24 through V30 Followed by: An online change made to the Safety Configuration Signature ID. The following RSLogix 5000 and Studio 5000 products are affected by this anomaly: 9324-RLD700NXENE (English) 9324-RLD700NXINT (International) 9324-RLD600ENE (English) 9324-RLD300NXINT (International) 9324-RLD300ENE (English) 9324-RLD300INTL (International) 9324-RLD250ENE (English) 9324-RLD250INTL (International) 9324-RLD200ENE (English) 9324-RLD200INTL (International) 9324-RLD000ENE (English) 9324-RLD000INTL (International) Important – GuardLogix and associated system hardware are not affected by this anomaly and may not be returned against this Product Safety Advisory. – Description – The Generic EtherNet/IP Safety Module profiles provided as part of RSLogix 5000 and Studio 5000 V24 through V30 does not properly handle an online change made to the Safety Configuration Signature ID on the Safety Page of the profile due to an anomaly in the Add-on Profile (AOP) core software. The changed Safety Configuration Signature ID does not result in the Safety connection closing. This causes the configuration in the GuardLogix controller to be different than the configuration in the CIP Safety device, resulting in potential unexpected operation. This anomaly is only evident after an online update is made to the Safety Configuration Signature ID of a safety device that uses the Generic EtherNet/IP Safety Module profile. If your system has not been subject to this type of online update, you are not affected. However, to make sure the anomaly does not occur as the result of a future online update, Rockwell Automation strongly recommends implementation of the actions in the Correction section of this document. – Temporary Workarounds – Prior to implementing full corrective actions, customers who may be affected by this anomaly are advised to delete the CIP Safety devices that are using the Generic EtherNet/IP Safety Module profile in their GuardLogix project and recreate them. This will force future online changes to the Safety Configuration Signature ID to cause the Safety connection to close. PRODUCT SAFETY ADVISORY Page 3 of 5 – Correction – Correction requires installation of Add-on Profiles (AOP) core software version 16.05 or greater. This software may be obtained through one of the following software distributions: Studio 5000 V24.02 release due end of July 2017. Installing Studio 5000 will upgrade the AOP core and resolve this anomaly in Studio 5000 V24 through V30. AOP for the 1756-EN2TP release due end of September 2017. Installing this profile will upgrade the AOP core and resolve this anomaly in Studio 5000 V24 through V30. Download this AOP from the Rockwell Automation Product Compatibility and Download Center (PCDC) at http://compatibility.rockwellautomation.com/Pages/MultiProductDownload.aspx. In the Find Downloads search field, enter “1756-EN2TP” and select the appropriate series and version information. Click the “Downloads” button, then click “Select Files”. Select the AOP for 1756-EN2TP file for download. Studio 5000 V31 release due end of calendar year 2017. Installing Studio 5000 will upgrade the AOP core and resolve this anomaly in Studio 5000 V24 through V30. V10 – V31 AOP bundle release due end of calendar year 2017. Installing this version of the AOP bundle will upgrade the AOP core and resolve this anomaly in Studio 5000 V24 and higher. Download this bundle from the Rockwell Automation PCDC at http://compatibility.rockwellautomation.com/Pages/MultiProductDownload.aspx. In the Find Downloads search field, enter “AOP Bundle”. Click the “Download” link, then select the “Add-On Profiles – All” selection. If you would like to receive and email notification when software correcting this anomaly is available for download and installation, click the link provided at the end of the Rockwell Automation Knowledgebase Article ID 1049420. – Requested Customer Action – Rockwell Automation requests you take the following actions: Check if you have a product affected by this Product Safety Advisory. Refer to the Product Identification and Description sections of this document for product identification assistance. Customers under support contract are automatically eligible for software updates. Customers not under a support contract should contact Rockwell Automation for further instructions. If you need additional assistance, please contact Rockwell Automation Technical Support. See Appendix A for local telephone numbers. Customers without TechConnect contracts should reference this Product Safety Advisory when calling. Customers with TechConnect contracts may be able to chat online with support representatives. Reference this Product Safety Advisory when connected to a support engineer. The most current version of this Product Safety Advisory is posted on the Rockwell Automation Support Center, http://www.rockwellautomation.com/knowledgebase, as ID number 1049420. Additional languages may also be available at the end of this article attached as downloadable PDF documents. PRODUCT SAFETY ADVISORY Page 4 of 5 Customers using the Rockwell Automation Support Center in a non-English language should search for the document by the article ID number listed above. The resulting article ID for non-English postings may be different than the listed article ID number. If this Product Safety Advisory does not affect you because you do not have the products any longer, or if you are a Distributor, Rockwell Automation asks that you forward a copy of this notice, with any identifying documentation, immediately to the person or company that now has the product. We also ask that you contact Rockwell Automation Technical Support and provide the location of the affected units. We appreciate your immediate cooperation. If you have any questions, please contact us. Sincerely, ROCKWELL AUTOMATION You can register for Automatic Product Safety Advisories and Product Notices from Rockwell Automation by email. Go to the Support web page at http://www.rockwellautomation.com/support and click the Visit the Technical Support Center link. Sign in with your Tech Connect Account or free Rockwell Automation Member Account and you can subscribe to important product updates, including Product Safety Advisories and Product Notices. PRODUCT SAFETY ADVISORY Page 5 of 5 Appendix A Regional Technical Support Information The following list can help you to contact the correct technical support center for your location. If your country is not listed, you can find a customer support number for your location on http://www.rockwellautomation.com/support/ by clicking Get Support Now, selecting your country, and clicking the Phone/OnSite Support tab. Region / Country Phone Number ( ) International Code Region / Country Phone Number ( ) International Code Asia/Pacific Europe Australia 1 800 762 593 Austria (49) 211 41553 664 China 400 620 6620 Belgium (32) 2 716 8411 Hong Kong +852 2887 4666 Czech Republic (420) 28401 5911 India 1 800 2000 121 Denmark (45) 43 466 006 Japan 03 3206 2785 Finland (358) 958 447 419 Korea (82) 2 2188 4400 France (33) 825303132 Malaysia 1 800 80 4851 Germany (49) 211 41553 664 New Zealand 0800 27 27 25 Hungary (420) 28401 5911 Taiwan 080 902 0908 Ireland (44) 01908 635245 Thailand (66) 2936 1500 Italy (Brescia, Milano e Padova) (39) 199 11 99 00 Caribbean Italy (Bologna,Firenze,Napoli, Roma e Torino) (39) 199 11 99 22 All Countries (English) (1) 440 646 3223 Morocco (33) 825303132 All Countries (Español) (1) 440 646 3650 Netherlands (31) 10 266 55 80 Central America Poland (48) 22 32 60 707 Argentina 800.666.0320 Portugal (1) 440 646 3223 Belize (1) 440 646 3650 Slovakia (420) 284015911 Bolivia (54) 800 10 0632 Spain (34) 902 30 93 30 Brazil (55) 11 5189 9500 Sweden (46) 46 19 93 91 Chile 800.53.0012 Switzerland (German) (41) 0844 84 84 11 Colombia 01.800.700.2107 Switzerland (French) (41) 0844 84 84 12 Costa Rica 0800.013.1215 Switzerland (Italian) (41) 0844 84 84 13 Ecuador 58.212.949.0611 United Kingdom (44) 01908 635245 El Salvador (52) 55 5246 2010 North America Guatemala 1.800.288.0108 Canada (1) 440-646-3223 Honduras (52) 55 5246 2010 United States (1) 440-646-3223 Mexico 001.888.365.8677 Nicaragua (52) 55 5246 2010 Panama 001.800.203.3475 Paraguay (54) 11 5554 4000 Peru 0800.535.36 Suriname (1) 440 646 3650 Uruguay (54) 11 5554 4000 Venezuela 800.1.00.3062 If you have a TechConnect Contract, please use the telephone number supplied to you with the contract.